##########################################################################
## Configuration file for Mutt mail agent (http://www.mutt.org)
## Generated on Fri Dec 03, 1999 18:01:34
##  by Muttrc Builder http://mutt.netliberte.org/
##  for ppp25-lorient.libertysurf.fr
#reset all

##########################################################################
## Personal options

## hdrs
##  Type: boolean
##  Default: set
##  When unset, the header fields normally added by the ``my_hdr'' command
##  are not created.  This variable must be unset before composing a new
##  message or replying in order to take effect.
#set hdrs

## use_domain
##  Type: boolean
##  Default: set
##  When set, Mutt will qualify all local addresses (ones without the
##  @host portion) with the value of ``$hostname''.  If unset, no
##  addresses will be qualified.
##
#set use_domain

## alternates
##  Type: string
##  Default: none
##  A regexp that allows you to specify alternate addresses where you
##  receive mail.
#set alternates = none

## hostname
##  Type: string
##  Default: varies
##  Specifies the hostname to use after the ``@'' in local e-mail
##  addresses.  This overrides the compile time definition obtained from
##  /etc/resolv.conf.
##
set hostname = localhost

## realname
##  Type: string
##  Default: GCOS field from /etc/passwd
##  This variable specifies what "real" or "personal" name should be used
##  when sending messages.
##
set realname = "Fax"

## spoolfile
##  Type: string
##  Default: most likely /var/mail/$USER or /usr/spool/mail/$USER
##  If your spool mailbox is in a non-default place where Mutt cannot find
##  it, you can specify its location with this variable.
set spoolfile = /var/spool/mail/fax

##########################################################################
## Alias options

## reverse_alias
##  Type: boolean
##  Default: unset
##  This variable controls whether or not Mutt will display the "personal"
##  name from your aliases in the index menu if it finds an alias that
##  matches the message's sender.
unset reverse_alias

## alias_file
##  Type: string
##  Default: ~/.muttrc
##  The default file in which to save aliases created by the ``create-
##  alias'' function.
##  Note: Mutt will not automatically source this file; you must
##  explicitly use the ``source'' command for it to be executed.
##
set alias_file = ~/.aliases

## alias_format
##  Type: string
##  Default: "%2n %t %-10a   %r"
##  Specifies the format of the data displayed for the `alias' menu.  The
##  following printf(3)-style sequences are available.
##
##  %a
set alias_format = "%2n %t %-10a   %r"

## sort_alias
##  Type: string
##  Default: alias
##  Specifies how the entries in the `alias' menu are sorted.  The
##  following are legal values:
##
##    address (sort alphabetically by email address)
##
##   alias (sort alphabetically by alias name)
##
##    unsorted (leave in order specified in .muttrc)
##
set sort_alias = alias

##########################################################################
## General options

## locale
##  Type: string
##  Default: "C"
##  The locale used by strftime(3) to format dates. Legal values are the
##  strings your system accepts for the locale variable LC_TIME.
##
#set locale = "C"

## menu_scroll
##  Type: boolean
##  Default: unset
##  When set, menus will be scrolled up or down one line when you attempt
##  to move across a screen boundary.  If unset, the screen is cleared and
##  the next or previous page of the menu is displayed (useful for slow
##  links to avoid many redraws).
##
unset menu_scroll

## meta_key
##  Type: boolean
##  Default: unset
##  If set, forces Mutt to interpret keystrokes with the high bit (bit 8)
##  set as if the user had pressed the ESC key and whatever key remains
##  after having the high bit removed.  For example, if the key pressed
##  has an ASCII value of 0xf4, then this is treated as if the user had
##  pressed ESC then ``x''.  This is because the result of removing the
##  high bit from ``0xf4'' is ``0x74'', which is the ASCII character
##  ``x''.
##
unset meta_key

## suspend
##  Type: boolean
##  Default: set
##  When unset, mutt won't stop when the user presses the terminal's susp
##  key, usually ``control-Z''. This is useful if you run mutt inside an
##  xterm using a command like xterm -e mutt.
##
unset suspend

## thorough_search
##  Type: boolean
##  Default: unset
##  Affects the ~b and ~h search operations described in section
##  ``patterns'' above.  If set, the headers and attachments of messages
##  to be searched are decoded before searching.
#unset thorough_search

## wait_key
##  Type: boolean
##  Default: set
##  Controls whether Mutt will ask you to press a key after shell-escape,
##  pipe-message, pipe-entry, print-message, and print-entry commands.
##
##  It is also used when viewing attachments with ``autoview'', provided
##  that the corresponding mailcap entry has a needsterminal flag, and the
##  external program is interactive.
##
##  When set, Mutt will always ask for a key. When unset, Mutt will wait
##  for a key only if the external command returned a non-zero status.
##
set wait_key

## history
##  Type: number
##  Default: 10
##  This variable controls the size (in number of strings remembered) of
##  the string history buffer. The buffer is cleared each time the
##  variable is set.
##
set history = 10

## read_inc
##  Type: number
##  Default: 10
##  If set to a value greater than 0, Mutt will display which message it
##  is currently on when reading a mailbox.  The message is printed after
##  read_inc messages have been read (e.g., if set to 25, Mutt will print
##  a message when it reads message 25, and then again when it gets to
##  message 50).
#set read_inc = 10

## write_inc
##  Type: number
##  Default: 10
##  When writing a mailbox, a message will be printed every write_inc
##  messages to indicate progress.  If set to 0, only a single message
##  will be displayed before writing a mailbox.
##
##  Also see the ``$read_inc'' variable.
##
#set write_inc = 10

## quit
##  Type: quadoption
##  Default: yes
##  This variable controls whether ``quit'' and ``exit'' actually quit
##  from mutt.  If it set to yes, they do quit, if it is set to no, they
##  have no effect, and if it is set to ask-yes or ask-no, you are
##  prompted for confirmation when you try to quit.
##
set quit = yes

## charset
##  Type: string
##  Default: iso-8859-1
##  Character set your terminal uses to display and enter textual data.
##  This information is required to properly label outgoing messages which
##  contain 8-bit characters so that receiving parties can display your
##  messages in the correct character set.
##
set charset = iso-8859-1

## date_format
##  Type: string
##  Default: "!%a, %b %d, %Y at %I:%M:%S%p %Z"
##  This variable controls the format of the date printed by the ``%d''
##  sequence in ``$index_format''.  This is passed to the strftime call to
##  process the date. See the man page for strftime(3) for the proper
##  syntax.
##
##  Unless the first character in the string is a bang (``!''), the month
##  and week day names are expanded according to the locale specified in
##  the variable ``locale''. If the first character in the string is a
##  bang, the bang is discarded, and the month and week day names in the
##  rest of the string are expanded in the C locale (that is in US
##  English).
##
set date_format = "!%a, %b %d, %Y at %I:%M:%S%p %Z"

## default_hook
##  Type: string
##  Default: "~f %s !~P | (~P ~C %s)"
##  This variable controls how send-hooks, save-hooks, and fcc-hooks will
##  be interpreted if they are specified with only a simple regexp,
##  instead of a matching pattern.  The hooks are expanded when they are
##  declared, so a hook will be interpreted according to the value of this
##  variable at the time the hook is declared.  The default value matches
##  if the message is either from a user matching the regular expression
##  given, or if it is from you (if the from address matches
##  ``alternates'') and is to or cc'ed to a user matching the given
##  regular expression.
##
#set default_hook = "~f %s !~P | (~P ~C %s)"

## tmpdir
##  Type: string
##  Default: /tmp
##  This variable allows you to specify where Mutt will place its
##  temporary files needed for displaying and composing messages.
##
set tmpdir = /tmp

## shell
##  Type: string
##  Default: retrieved from passwd file
##  Command to use when spawning a subshell.
##
#set shell = retrieved from passwd file

## simple_search
##  Type: string
##  Default: "~f %s | ~s %s"
##  Specifies how Mutt should expand a simple search into a real search
##  pattern.  A simple search is one that does not contain any of the ~
##  operators.  See ``patterns'' for more information on search patterns.
##
##  For example, if you simply type joe at a search or limit prompt, Mutt
##  will automatically expand it to the value specified by this variable.
##  For the default value it would be:
##
##  ~f joe | ~s joe
##
#set simple_search = "~f %s | ~s %s"

##########################################################################
## Main menu

## collapse_unread
##  Type: boolean
##  Default: set
##  When unset, Mutt will not collapse a thread if it contains any unread
##  messages.
##
set collapse_unread

## arrow_cursor
##  Type: boolean
##  Default: unset
##  When set, an arrow (``->'') will be used to indicate the current entry
##  in menus instead of hiliting the whole line.
unset arrow_cursor

## ascii_chars
##  Type: boolean
##  Default: unset
##  If set, Mutt will use plain ASCII characters when displaying thread
##  and attachment trees, instead of the default ACS characters.
##
unset ascii_chars

## auto_tag
##  Type: boolean
##  Default: unset
##  When set, functions in the index menu which affect a message will be
##  applied to all tagged messages (if there are any).  When unset, you
##  must first use the tag-prefix function (default: ";") to make the next
##  function apply to all tagged messages.
##
unset auto_tag

## beep
##  Type: boolean
##  Default: set
##  When this variable is set, mutt will beep when an error occurs.
##
unset beep

## beep_new
##  Type: boolean
##  Default: unset
##  When this variable is set, mutt will beep whenever it prints a message
##  notifying you of new mail.  This is independent of the setting of the
##  ``beep'' variable.
##
set beep_new

## check_new
##  Type: boolean
##  Default: set
##  Note: this option only affects maildir and MH style mailboxes.
##
##  When set, Mutt will check for new mail delivered while the mailbox is
##  open.
set check_new

## help
##  Type: boolean
##  Default: set
##  When set, help lines describing the bindings for the major functions
##  provided by each menu are displayed on the first line of the screen.
##
##  Note: The binding will not be displayed correctly if the function is
##  bound to a sequence rather than a single keystroke.  Also, the help
##  line may not be updated if a binding is changed while Mutt is running.
##  Since this variable is primarily aimed at new users, neither of these
##  should present a major problem.
##
#set help

## mark_old
##  Type: boolean
##  Default: set
##  Controls whether or not Mutt makes the distinction between new
##  messages and old unread messages.  By default, Mutt will mark new
##  messages as old if you exit a mailbox without reading them.  The next
##  time you start Mutt, the messages will show up with an "O" next to
##  them in the index menu, indicating that they are old.
set mark_old

## markers
##  Type: boolean
##  Default: set
##  Controls the display of wrapped lines in the internal pager. If set, a
##  ``+'' marker is displayed at the beginning of wrapped lines. Also see
##  the ``$smart_wrap'' variable.
##
set markers

## resolve
##  Type: boolean
##  Default: set
##  When set, the cursor will be automatically advanced to the next
##  (possibly undeleted) message whenever a command that modifies the
##  current message is executed.
##
set resolve

## sort_re
##  Type: boolean
##  Default: set
##  This variable is only useful when sorting by threads with
##  ``strict_threads'' unset.  In that case, it changes the heuristic mutt
##  uses to thread messages by subject.  With sort_re set, mutt will only
##  attach a message as the child of another message by subject if the
##  subject of the child message starts with a substring matching the
##  setting of ``reply_regexp''.
set sort_re

## status_on_top
##  Type: boolean
##  Default: unset
##  Setting this variable causes the ``status bar'' to be displayed on the
##  first line of the screen rather than near the bottom.
##
unset status_on_top

## strict_threads
##  Type: boolean
##  Default: unset
##  If set, threading will only make use of the ``In-Reply-To'' and
##  ``References'' fields when ``sorting'' by message threads.  By
##  default, messages with the same subject are grouped together in
##  ``pseudo threads.''  This may not always be desirable, such as in a
##  personal mailbox where you might have several unrelated messages with
##  the subject ``hi'' which will get grouped together.
##
unset strict_threads

## uncollapse_jump
##  Type: boolean
##  Default: unset
##  When set, Mutt will jump to the next unread message, if any, when the
##  current thread is uncollapsed.
##
#unset uncollapse_jump

## wrap_search
##  Type: boolean
##  Default: set
##  Controls whether searches wrap around the end of the mailbox.
##
##  When set, searches will wrap around the first (or last) message. When
##  unset, searches will not wrap.
##
#set wrap_search

## index_format
##  Type: format
##  Default: "%4C %Z %{%b %d} %-15.15L (%4l) %s"
##  This variable allows you to customize the message index display to
##  your personal taste.
##
##  ``Format strings'' are similar to the strings used in the ``C''
##  function printf to format output (see the man page for more detail).
##  The following sequences are defined in Mutt:
##
##       %a      address of the author
##       %b      filename of the original message folder (think mailBox)
##       %B      the list to which the letter was sent, or else the folder name (%b).
##       %c      number of characters (bytes) in the message
##       %C      current message number
##       %d      date and time of the message in the format specified by
##
#set index_format = "%4C %Z %{%b %d} %-15.15L (%4l) %s"

## mail_check
##  Type: number
##  Default: 5
##  This variable configures how often (in seconds) mutt should look for
##  new mail.
##
set mail_check = 10

## timeout
##  Type: number
##  Default: 600
##  This variable controls the number of seconds Mutt will wait for a key
##  to be pressed in the main menu before timing out and checking for new
##  mail.
set timeout = 120

## delete
##  Type: quadoption
##  Default: ask-yes
##  Controls whether or not messages are really deleted when closing or
##  synchronizing a mailbox.  If set to yes, messages marked for deleting
##  will automatically be purged without prompting.  If set to no,
##  messages marked for deletion will be kept in the mailbox.
##
#set delete = ask-yes

## reply_regexp
##  Type: string
##  Default: "^(re|aw):[ \t]*"
##  A regular expression used to recognize reply messages when threading
##  and replying. The default value corresponds to the English "Re:" and
##  the German "Aw:".
##
set reply_regexp = "Re:[ \t]*"

## sort
##  Type: string
##  Default: date-sent
##  Specifies how to sort messages in the index menu.  Valid values are
##
##    date or date-sent
##
##    date-received
##
##    from
##
##    mailbox-order (unsorted)
##
##    score
##
##    size
##
##    subject
##
##    threads
##
##    to
##
##  You may optionally use the reverse- prefix to specify reverse sorting
##  order (example: set sort=reverse-date-sent).
##
set sort = threads 
#set sort = from
set sort_aux = date

## status_chars
##  Type: string
##  Default: "-*%A"
##  Controls the characters used by the "%r" indicator in
##  ``status_format''. The first character is used when the mailbox is
##  unchanged. The second is used when the mailbox has been changed, and
##  it needs to be resynchronized. The third is used if the mailbox is in
##  read-only mode, or if the mailbox will not be written when exiting
##  that mailbox (You can toggle whether to write changes to a mailbox
##  with the toggle-write operation, bound by default to "%"). The fourth
##  is used to indicate that the current folder has been opened in attach-
##  message mode (Certain operations like composing a new mail, replying,
##  forwarding, etc. are not permitted in this mode).
##
#set status_chars = "-*%A"

## status_format
##  Type: string
##  Default: "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d?
##  Del:%d?%?F? Flag:%F?%?t? Tag:%t?%?p? Post:%p?%?b? Inc:%b? %?l?
##  %l?]---(%s/%S)-%>-(%P)---"
##
##  Controls the format of the status line displayed in the index menu.
##  This string is similar to ``$index_format'', but has its own set of
##  printf()-like sequences:
##
##       %b      number of mailboxes with new mail *
##       %d      number of deleted messages *
##       %h      local hostname
##       %f      the full pathname of the current mailbox
##       %F      number of flagged messages *
##       %l      size (in bytes) of the current mailbox *
##       %L      size (in bytes) of the messages shown (i.e., which match the current limit) *
##       %m      the number of messages in the mailbox *
##       %M      the number of messages shown (i.e., which match the current limit) *
##       %n      number of new messages in the mailbox *
##       %o      number of old unread messages
##       %p      number of postponed messages *
##       %P      percentage of the way through the index
##       %r      modified/read-only/won't-write/attach-message indicator, according to $status_chars
##       %s      current sorting mode ($sort)
##       %S      current aux sorting method ($sort_aux)
##       %t      number of tagged messages *
##       %u      number of unread messages *
##       %v      Mutt version string
##       %V      currently active limit pattern, if any *
##
##       %>X     right justify the rest of the string and pad with "X"
##       %|X     pad to the end of the line with "X"
##
##       * = can be optionally printed if nonzero
##
##  Some of the above sequences can be used to optionally print a string
##  if their value is nonzero.  For example, you may only want to see the
##  number of flagged messages if such messages exist, since zero is not
##  particularly meaningful.  To optionally print a string based upon one
##  of the above sequences, the following construct is used
##
#set status_format = "-%r-Mutt: %f [Msgs:%?M?%M/?%m%?n? New:%n?%?o? Old:%o?%?d?

## to_chars
##  Type: string
##  Default: " +TCF"
##  Controls the character used to indicate mail addressed to you.  The
##  first character is the one used when the mail is NOT addressed to your
##  address (default: space).  The second is used when you are the only
##  recipient of the message (default: +).  The third is when your address
##  appears in the TO header field, but you are not the only recipient of
##  the message (default: T).  The fourth character is used when your
##  address is specified in the CC header field, but you are not the only
##  recipient.  The fifth character is used to indicate mail that was sent
##  by you.
##
#set to_chars = " +TCF"

## sort_aux
##  Type: string
##  Default: date-sent
##  When sorting by threads, this variable controls how threads are sorted
##  in relation to other threads, and how the branches of the thread trees
##  are sorted.  This can be set to any value that ``sort'' can, except
##  threads (in that case, mutt will just use date-sent).
set sort_aux = reverse-date-received

##########################################################################
## Pager options

## prompt_after
##  Type: boolean
##  Default: set
##  If you use an external ``pager'', setting this variable will cause
##  Mutt to prompt you for a command when the pager exits rather than
##  returning to the index menu.
#set prompt_after

## smart_wrap
##  Type: boolean
##  Default: set
##  Controls the display of lines longer then the screen width in the
##  internal pager. If set, long lines are wrapped at a word boundary.  If
##  unset, lines are simply wrapped at the screen edge. Also see the
##  ``$markers'' variable.
##
#set smart_wrap

## tilde
##  Type: boolean
##  Default: unset
##  When set, the internal-pager will pad blank lines to the bottom of the
##  screen with a tilde (~).
##
#unset tilde

## pager_stop
##  Type: boolean
##  Default: unset
##  When set, the internal-pager will not move to the next message when
##  you are at the end of a message and invoke the next-page function.
##
#unset pager_stop

## pager_format
##  Type: format
##  Default: "-%S- %C/%m: %-20.20n   %s"
##  This variable controls the format of the one-line message ``status''
##  displayed before each message in either the internal or an external
##  pager.  The valid sequences are listed in the ``index_format''
##  section.
##
#set pager_format = "-%S- %C/%m: %-20.20n   %s"

## pager_context
##  Type: number
##  Default: 0
##  This variable controls the number of lines of context that are given
##  when displaying the next or previous page in the internal pager.  By
##  default, Mutt will display the line after the last one on the screen
##  at the top of the next page (0 lines of context).
##
#set pager_context = 0

## pager_index_lines
##  Type: number
##  Default: 0
##  Determines the number of lines of a mini-index which is shown when in
##  the pager.  The current message, unless near the top or bottom of the
##  folder, will be roughly one third of the way down this mini-index,
##  giving the reader the context of a few messages before and after the
##  message.  This is useful, for example, to determine how many messages
##  remain to be read in the current thread.  One of the lines is reserved
##  for the status bar from the index, so a pager_index_lines of 6 will
##  only show 5 lines of the actual index.  A value of 0 results in no
##  index being shown.  If the number of messages in the current folder is
##  less than pager_index_lines, then the index will only use as many
##  lines as it needs.
##
#set pager_index_lines = 0

## escape
##  Type: string
##  Default: ~
##  Escape character to use for functions in the builtin editor.
##
#set escape = ~

## pager
##  Type: string
##  Default: builtin
##  This variable specifies which pager you would like to use to view
##  messages.  builtin means to use the builtin pager, otherwise this
##  variable should specify the pathname of the external pager you would
##  like to use.
##
##  Using an external pager may have some disadvantages: Additional
##  keystrokes are necessary because you can't call mutt functions
##  directly from the pager, and screen resizes cause lines longer than
##  the screen width to be badly formatted in the help menu.
##
#set pager = builtin

## quote_regexp
##  Type: string
##  Default: "^([ \t]*[>|#:}])+"
##  A regular expression used in the internal-pager to determine quoted
##  sections of text in the body of a message.
##
##  Note: In order to use the quotedx patterns in the internal pager, you
##  need to set this to a regular expression that matches exactly the
##  quote characters at the beginning of quoted lines.
##
#set quote_regexp = "^([ \t]*[>|#:}])+"

## smileys
##  Type: string
##  Default: (>From)|(:[-^]?[][)(><}{|/DP])
##  The pager uses this variable to catch some common false positives of
##  ``quote_regexp'', most notably smileys in the beginning of a line
##
#set smileys = (>From)|(:[-^]?[][)(><}{|/DP])

## visual
##  Type: string
##  Default: $VISUAL
##  Specifies the visual editor to invoke when the ~v command is given in
##  the builtin editor.
##
#set visual = $VISUAL

##########################################################################
## Compose options

## askbcc
##  Type: boolean
##  Default: unset
##  If set, Mutt will prompt you for blind-carbon-copy (Bcc) recipients
##  before editing an outgoing message.
##
#unset askbcc

## askcc
##  Type: boolean
##  Default: unset
##  If set, Mutt will prompt you for carbon-copy (Cc) recipients before
##  editing the body of an outgoing message.
##
#unset askcc

## autoedit
##  Type: boolean
##  Default: unset
##  When set, Mutt will skip the initial send-menu and allow you to
##  immediately begin editing the body of your message when replying to
##  another message.  The send-menu may still be accessed once you have
##  finished editing the body of your message.
##
##  If the ``$edit_headers'' variable is also set, the initial prompts in
##  the send-menu are always skipped, even when composing a new message.
##
#unset autoedit

## edit_headers
##  Type: boolean
##  Default: unset
##  This option allows you to edit the header of your outgoing messages
##  along with the body of your message.
##
#unset edit_headers

## hidden_host
##  Type: boolean
##  Default: unset
##  When set, mutt will skip the host name part of ``hostname'' variable
##  when adding the domain part to addresses.  This variable does not
##  affect the generation, and it will not lead to the cut-off of first-
##  level domains.
##
#unset hidden_host

## ignore_list_reply_to
##  Type: boolean
##  Default: unset
##  Affects the behaviour of the reply function when replying to messages
##  from mailing lists.  When set, if the ``Reply-To:'' field is set to
##  the same value as the ``To:'' field, Mutt assumes that the ``Reply-
##  To:'' field was set by the mailing list to automate responses to the
##  list, and will ignore this field.  To direct a response to the mailing
##  list when this option is set, use the list-reply function; group-reply
##  will reply to both the sender and the list.
##
#unset ignore_list_reply_to

## sig_dashes
##  Type: boolean
##  Default: set
##  If set, a line containing ``-- '' will be inserted before your
##  ``signature''.  It is strongly recommended that you not unset this
##  variable unless your ``signature'' contains just your name.  The
##  reason for this is because many software packages use ``-- 
##'' to
##  detect your signature.  For example, Mutt has the ability to highlight
##  the signature in a different color in the builtin pager.
##
#set sig_dashes

## write_bcc
##  Type: boolean
##  Default: set
##  Controls whether mutt writes out the Bcc header when preparing
##  messages to be sent.
#set write_bcc

## postpone
##  Type: quadoption
##  Default: ask-yes
##  Controls whether or not messages are saved in the ``$postponed''
##  mailbox when you elect not to send immediately.
##
#set postpone = ask-yes

## recall
##  Type: quadoption
##  Default: ask-yes
##  Controls whether or not you are prompted to recall postponed messages
##  when composing a new message.
#set recall = ask-yes

## editor
##  Type: string
##  Default: value of environment variable $VISUAL, $EDITOR, or "vi"
##  This variable specifies which editor to use when composing messages.
##
set editor = "vim '+set tw=72'"

## ispell
##  Type: string
##  Default: "ispell"
##  How to invoke ispell (GNU's spell-checking software).
##
#set ispell = "ispell"

## postponed
##  Type: string
##  Default: ~/postponed
##  Mutt allows you to indefinitely ``postpone sending a message'' which
##  you are editing.  When you choose to postpone a message, Mutt saves it
##  in the folder specified by this variable.  Also see the ``$postpone''
##  variable.
##
#set postponed = ~/postponed

## query_command
##  Type: string
##  Default: null
##  This specifies the command that mutt will use to make external address
##  queries.  The string should contain a %s, which will be substituted
##  with the query string the user types.
set query_command = null

## signature
##  Type: string
##  Default: ~/.signature
##  Specifies the filename of your signature, which is appended to all
##  outgoing messages.   If the filename ends with a pipe (``|''), it is
##  assumed that filename is a shell command and input should be read from
##  its stdout.
##
set signature = ~/.signature

##########################################################################
## Reply options

## in_reply_to
##  Type: format
##  Default: "%i; from \"%a" on %{!%a, %b %d, %Y at %I:%M:%S%p}"
##  This specifies the format of the In-Reply-To: header field added when
##  replying to a message. For a full listing of defined escape sequences
##  see the section on ``$index_format''.
##
#set in_reply_to = "%i; from \'%a' on %{!%a, %b %d, %Y at %I:%M:%S%p}"

## fast_reply
##  Type: boolean
##  Default: unset
##  When set, the initial prompt for recipients and subject are skipped
##  when replying to messages, and the initial prompt for subject is
##  skipped when forwarding messages.
##
##  Note: this variable has no effect when the ``$autoedit'' variable is
##  set.
##
set fast_reply

## header
##  Type: boolean
##  Default: unset
##  When set, this variable causes Mutt to include the full header of the
##  message you are replying to into the edit buffer.
##
#unset header

## metoo
##  Type: boolean
##  Default: unset
##  If unset, Mutt will remove your address from the list of recipients
##  when replying to a message.
##
#unset metoo

## reply_self
##  Type: boolean
##  Default: unset
##  If unset and you are replying to a message sent by you, Mutt will
##  assume that you want to reply to the recipients of that message rather
##  than to yourself.
##
#unset reply_self

## reverse_name
##  Type: boolean
##  Default: unset
##  It may sometimes arrive that you receive mail to a certain machine,
##  move the messages to another machine, and reply to some the messages
##  from there.  If this variable is set, the default From: line of the
##  reply messages is built using the address where you received the
##  messages you are replying to.
#unset reverse_name

## attribution
##  Type: format
##  Default: "On %d, %n wrote:"
##  This is the string that will precede a message which has been included
##  in a reply.  For a full listing of defined escape sequences see the
##  section on ``$index_format''.
##
set attribution = "Le %d, %n a ecrit:"

## indent_string
##  Type: format
##  Default: "> "
##  Specifies the string to prepend to each line of text quoted in a
##  message to which you are replying.  You are strongly encouraged not to
##  change this value, as it tends to agitate the more fanatical netizens.
##
#set indent_string = "> "

## post_indent_string
##  Type: format
##  Default: none
##  Similar to the ``$attribution'' variable, Mutt will append this string
##  after the inclusion of a message which is being replied to.
##
#set post_indent_string = none

## include
##  Type: quadoption
##  Default: ask-yes
##  Controls whether or not a copy of the message(s) you are replying to
##  is included in your reply.
##
set include = yes

## reply_to
##  Type: quadoption
##  Default: ask-yes
##  If set, Mutt will ask you if you want to use the address listed in the
##  Reply-To: header field when replying to a message.  If you answer no,
##  it will use the address in the From: header field instead.  This
##  option is useful for reading a mailing list that sets the Reply-To:
##  header field to the list address and you want to send a private
##  message to the author of a message.
##
set reply_to = ask-yes

##########################################################################
## Sending options

## allow_8bit
##  Type: boolean
##  Default: set
##  Controls whether 8-bit data is converted to 7-bit using either Quoted-
##  Printable or Base64 encoding when sending mail.
##
set allow_8bit

## bounce_delivered
##  Type: boolean
##  Default: set
##  When this variable is set, mutt will include Delivered-To headers when
##  bouncing messages.  Postfix users may wish to unset this variable.
##
#set bounce_delivered

## followup_to
##  Type: boolean
##  Default: set
##  Controls whether or not the Mail-Followup-To header field is generated
##  when sending mail.  When set, Mutt will generate this field when you
##  are replying to a known mailing ``lists''.
##
##  The purpose of this field is to prevent you from receiving duplicate
##  copies of replies to messages which you send by specifying that you
##  will receive a copy of the message if it is addressed to the mailing
##  list (and thus there is no need to also include your address in a
##  group reply).
##
#set followup_to

## force_name
##  Type: boolean
##  Default: unset
##  This variable is similar to ``$save_name'', except that Mutt will
##  store a copy of your outgoing message by the username of the address
##  you are sending to even if that mailbox does not exist.
##
##  Also see the ``$record'' variable.
##
#unset force_name

## save_name
##  Type: boolean
##  Default: unset
##  This variable controls how copies of outgoing messages are saved.
##  When set, a check is made to see if a mailbox specified by the
##  recipient address exists (this is done by searching for a mailbox in
##  the ``folder'' directory with the username part of the recipient
##  address).  If the mailbox exists, the outgoing message will be saved
##  to that mailbox, otherwise the message is saved to the ``record''
##  mailbox.
##
##  Also see the ``$force_name'' variable.
##
#unset save_name

## use_from
##  Type: boolean
##  Default: set
##  When set, Mutt will generate the `From:' header field when sending
##  messages.  If unset, no `From:' header field will be generated unless
##  the user explicitly sets one using the ``my_hdr'' command.
##
set use_from

## abort_nosubject
##  Type: quadoption
##  Default: ask-yes
##  If set to yes, when composing messages and no subject is given at the
##  subject prompt, composition will be aborted.
set abort_nosubject = ask-yes

## abort_unmodified
##  Type: quadoption
##  Default: yes
##  If set to yes, composition will automatically abort after editing the
##  message body if no changes are made to the file (this check only
##  happens after the first edit of the file).  When set to no,
##  composition will never be aborted.
##
set abort_unmodified = yes

## copy
##  Type: quadoption
##  Default: yes
##  This variable controls whether or not copies of your outgoing messages
##  will be saved for later references.  Also see ``record'',
##  ``save_name'', ``force_name'' and ``fcc-hook''.
##
#set copy = yes

## record
##  Type: string
##  Default: none
##  This specifies the file into which your outgoing messages should be
##  appended.  (This is meant as the primary method for saving a copy of
##  your messages, but another way to do this is using the ``my_hdr''
##  command to create a Bcc: field with your email address in it.)
##
##  The value of $record is overridden by the ``$force_name'' and
##  ``$save_name'' variables, and the ``fcc-hook'' command.
##
#set record = none

##########################################################################
## Forward options

## forward_decode
##  Type: boolean
##  Default: set
##  Controls the decoding of complex MIME messages into text/plain when
##  forwarding a message.
#set forward_decode

## forward_decrypt
##  Type: boolean
##  Default: unset
##  Controls the handling of encrypted messages when forwarding a message.
##  When set, the outer layer of encryption is stripped off.  This
##  variable is only used if ``mime_forward'' is set and
##  ``mime_forward_decode'' is unset.
##
#unset forward_decrypt

## forward_quote
##  Type: boolean
##  Default: unset
##  When set forwarded messages included in the main body of the message
##  (when ``mime_forward'' is unset) will be quoted using
##  ``indent_string''.
##
#unset forward_quote

## forward_weed
##  Type: boolean
##  Default: set
##  When set, message headers will be weeded when forwarding a decoded
##  version of the message.
##
#set forward_weed

## mime_forward_decode
##  Type: boolean
##  Default: unset
##  Controls the decoding of complex MIME messages into text/plain when
##  forwarding a message while ``mime_forward'' is set. Otherwise
##  ``forward_decode'' is used instead.
##
#unset mime_forward_decode

## forward_format
##  Type: format
##  Default: "[%a: %s]"
##  This variable controls the default subject when forwarding a message.
##  It uses the same format sequences as the ``$index_format'' variable.
##
#set forward_format = "[%a: %s]"

## mime_forward
##  Type: quadoption
##  Default: unset
##  When set, the message you are forwarding will be attached as a
##  separate MIME part instead of included in the main body of the
##  message.  This is useful for forwarding MIME messages so the receiver
##  can properly view the message as it was delivered to you. If you like
##  to switch between MIME and not MIME from mail to mail, set this
##  variable to ask-no or ask-yes.
##
##  Also see ``forward_decode'' and ``mime_forward_decode''.
##
#set mime_forward = unset

##########################################################################
## Folders and mailbox

## read_only
##  Type: boolean
##  Default: unset
##  If set, all folders are opened in read-only mode.
##
#unset read_only

## folder
##  Type: string
##  Default: ~/Mail
##  Specifies the default location of your mailboxes.  A `+' or `=' at the
##  beginning of a pathname will be expanded to the value of this
##  variable.  Note that if you change this variable from the default
##  value you need to make sure that the assignment occurs before you use
##  `+' or `=' for any other variables since expansion takes place during
##  the `set' command.
##
set folder = ~/Mail

## mask
##  Type: string
##  Default: "!^\.[^.]"
##  A regular expression used in the file browser, optionally preceded by
##  the not operator ``!''.  Only files whose names match this mask will
##  be shown. The match is always case-sensitive.
##
##  Note: if you need ``!'' at the beginning of the regular expression you
##  should enclose it in paranthesis, in order to distinguish it from the
##  logical not operator for the expression.
##
#set mask = "!^\.[^.]"

## mbox
##  Type: string
##  Default: ~/mbox
##  This specifies the folder into which read mail in your ``spoolfile''
##  folder will be appended.
##
set mbox = ~/Mail/Fax-Archive

## confirmappend
##  Type: boolean
##  Default: set
##  When set, Mutt will prompt for confirmation when appending messages to
##  an existing mailbox.
##
#set confirmappend

## confirmcreate
##  Type: boolean
##  Default: set
##  When set, Mutt will prompt for confirmation when saving messages to a
##  mailbox which does not yet exist before creating it.
##
set confirmcreate

## mh_purge
##  Type: boolean
##  Default: unset
##  When unset, mutt will mimic mh's behaviour and rename deleted messages
##  to ,<old file name> in mh folders instead of really deleting them.  If
##  the variable is set, the message files will simply be deleted.
##
unset mh_purge

## save_address
##  Type: boolean
##  Default: unset
##  If set, mutt will take the sender's full address when choosing a
##  default folder for saving a mail. If ``save_name'' or ``force_name''
##  is set too, the selection of the fcc folder will be changed as well.
##
unset save_address

## save_empty
##  Type: boolean
##  Default: set
##  When unset, mailboxes which contain no saved messages will be removed
##  when closed (the exception is ``spoolfile'' which is never removed).
##  If set, mailboxes are never removed.
##
##  Note: This only applies to mbox and MMDF folders, Mutt does not delete
##  MH and Maildir directories.
##
set save_empty

## folder_format
##  Type: format
##  Default: "%N %F %2l %-8.8u %-8.8g %8s %d %f"
##  This variable allows you to customize the file browser display to your
##  personal taste.  This string is similar to ``$index_format'', but has
##  its own set of printf()-like sequences:
##
##  %d
set folder_format = "%N %F %2l %-8.8u %-8.8g %8s %d %f"

## move
##  Type: quadoption
##  Default: ask-no
##  Controls whether you will be asked to confirm moving read messages
##  from your spool mailbox to your ``$mbox'' mailbox, or as a result of a
##  ``mbox-hook'' command.
##
set move = ask-no

## mbox_type
##  Type: string
##  Default: mbox
##  The default mailbox type used when creating new folders. May be any of
##  mbox, MMDF, MH and Maildir.
##
set mbox_type = mbox

## sort_browser
##  Type: string
##  Default: (none)
##  Specifies how to sort entries in the file browser.  By default, the
##  entries are sorted alphabetically.  Valid values:
##
##    alpha (alphabetically)
##
##    date
##
##    size
##
##    unsorted
##
##  You may optionally use the reverse- prefix to specify reverse sorting
##  order (example: set sort_browser=reverse-date).
##
set sort_browser = alpha

##########################################################################
## Attaching documents and MIME options

## attach_sep
##  Type: string
##  Default: newline
##  The separator to add between attachments when operating (saving,
##  printing, piping, etc) on a list of tagged attachments.
##
#set attach_sep = newline

## attach_split
##  Type: boolean
##  Default: set
##  If this variable is unset, when operating (saving, printing, piping,
##  etc) on a list of tagged attachments, Mutt will concatenate the
##  attachments and will operate on them as a single attachment. The
##  ``$attach_sep'' separator is added after each attachment. When set,
##  Mutt will operate on the attachments one by one.
##
#set attach_split

## fcc_attach
##  Type: boolean
##  Default: set
##  This variable controls whether or not attachments on outgoing messages
##  are saved along with the main body of your message.
##
#set fcc_attach

## attach_format
##  Type: format
##  Default: "%u%D%t%2n %T%.40d%> [%.7m/%.10M, %.6e, %s] "
##  This variable describes the format of the `attachment' menu.
set attach_format = "%u%D%t%2n %T%.40d%> [%.7m/%.10M, %.6e, %s] "

## message_format
##  Type: format
##  Default: "%s"
##  This is the string displayed in the ``attachment'' menu for
##  attachments of type message/rfc822.  For a full listing of defined
##  escape sequences see the section on ``index_format''.
##
#set message_format = "%s"

##########################################################################
## mailcap and MIME

## mailcap_sanitize
##  Type: boolean
##  Default: set
##  If set, mutt will restrict possible characters in mailcap % expandos
##  to a well-defined set of safe characters.  This is the safe setting,
##  but we are not sure it doesn't break some more advanced MIME stuff.
##
##  DON'T CHANGE THIS SETTING UNLESS YOU ARE REALLY SURE WHAT YOU ARE
##  DOING!
##
#set mailcap_sanitize

## mailcap_path
##  Type: string
##  Default: $MAILCAPS or
##  ~/.mailcap:/usr/local/share/mailcap:/etc/mailcap:/usr/etc/mailcap:/usr/local/etc/mailcap
##
##  This variable specifies which files to consult when attempting to
##  display MIME bodies not directly supported by Mutt.
##
#set mailcap_path = $MAILCAPS or

##########################################################################
## Using PGP

## pgp_timeout
##  Type: number
##  Default: 300
##  The number of seconds after which a cached passphrase will expire if
##  not used.
##
#set pgp_timeout = 300

## pgp_long_ids
##  Type: boolean
##  Default: unset
##  If set, use 64 bit PGP key IDs. Unset uses the normal 32 bit Key IDs.
##
#unset pgp_long_ids

## pgp_replyencrypt
##  Type: boolean
##  Default: unset
##  If set, automatically PGP encrypt replies to messages which are
##  encrypted.
##
#unset pgp_replyencrypt

## pgp_autosign
##  Type: boolean
##  Default: unset
##  Setting this variable will cause Mutt to always attempt to PGP/MIME
##  sign outgoing messages.  This can be overridden by use of the pgp-
##  menu, when signing is not required or encryption is requested as well.
##
#unset pgp_autosign

## pgp_autoencrypt
##  Type: boolean
##  Default: unset
##  Setting this variable will cause Mutt to always attempt to PGP/MIME
##  encrypt outgoing messages.  This is probably only useful in connection
##  to the send-hook command.  It can be overridden by use of the pgp-
##  menu, when encryption is not required or signing is requested as well.
##
#unset pgp_autoencrypt

## pgp_encryptself
##  Type: boolean
##  Default: set
##  If set, the PGP +encrypttoself flag is used when encrypting messages.
##
##  Note: This option only works with PGP but is ignored in combination
##  with GnuPG.
##
#set pgp_encryptself

## pgp_replysign
##  Type: boolean
##  Default: unset
##  If set, automatically PGP sign replies to messages which are signed.
##
##  Note: this does not work on messages, that are encrypted and signed!
##
#unset pgp_replysign

## pgp_strict_enc
##  Type: boolean
##  Default: set
##  If set, Mutt will automatically encode PGP/MIME signed messages as
##  quoted-printable.  Please note that unsetting this variable may lead
##  to problems with non-verifyable PGP signatures, so only change this if
##  you know what you are doing.
##
#set pgp_strict_enc

## pgp_verify_sig
##  Type: quadoption
##  Default: yes
##  If ``yes'', always attempt to verify PGP/MIME signatures.  If ``ask'',
##  ask whether or not to verify the signature.  If ``no'', never attempt
##  to verify PGP/MIME signatures.
##
#set pgp_verify_sig = yes

## pgp_default_version
##  Type: string
##  Default: pgp2 (or pgp5, if PGP 2.* is not installed, or gpg, if none
##  of them is installed)
##
##  Set this to pgp2 (PGP 2.*), pgp5 (PGP 5.*), or gpg (GNU privacy
##  guard), depending on the version that you primarily use. This variable
##  is not directly used, but it is the default for the variables
##  ``$pgp_receive_version'', ``$pgp_send_version'', and
##  ``$pgp_key_version''.
##
#set pgp_default_version = pgp2 (or pgp5, if PGP 2.* is not installed, or gpg, if none

## pgp_gpg
##  Type: string
##  Default: system dependent
##  This variable allows you to override the compile time definition of
##  where the gpg (GNU Privacy Guard) binary resides on your system.
##
#set pgp_gpg = system dependent

## pgp_key_version
##  Type: string
##  Default: ``default''
##  This variable determines which PGP version is used for key ring
##  operations like extracting keys from messages and extracting keys from
##  your keyring. If you set this to default, the default defined in
##  ``$pgp_default_version'' is used. Set this to pgp2 (PGP 2.*), pgp5
##  (PGP 5.*), or gpg (GNU privacy guard) if you want to use a different
##  PGP version for key operations.
##
#set pgp_key_version = ``default''

## pgp_receive_version
##  Type: string
##  Default: ``default''
##  This variable determines which PGP version is used for decrypting
##  messages and verifying signatures. If you set this to default, the
##  default defined in ``$pgp_default_version'' will be used. Set this to
##  pgp2 (PGP 2.*), pgp5 (PGP 5.*), or gpg (GNU privacy guard) if you want
##  to use a different PGP version for receiving operations.
##
#set pgp_receive_version = ``default''

## pgp_send_version
##  Type: string
##  Default: ``default''
##  This variable determines which PGP version is used for composing new
##  messages like encrypting and signing. If you set this to default, the
##  default defined in ``$pgp_default_version'' will be used. Set this to
##  pgp2 (PGP 2.*), pgp5 (PGP 5.*), or gpg (GNU privacy guard) if you want
##  to use a different PGP version for sending operations.
##
#set pgp_send_version = ``default''

## pgp_sign_as
##  Type: string
##  Default: unset
##  If you have more than one key pair, this option allows you to specify
##  which of your private keys to use.  It is recommended that you use the
##  keyid form to specify your key (e.g., ``0xABCDEFGH'').
##
#set pgp_sign_as = unset

## pgp_sign_micalg
##  Type: string
##  Default: pgp-md5
##  This variable contains the default message integrity check algorithm.
##  Valid values are ``pgp-md5'', ``pgp-sha1'', and ``pgp-rmd160''. If you
##  select a signing key using the sign as option on the compose menu,
##  mutt will automagically figure out the correct value to insert here,
##  but it does not know about the user's default key.
##
##  So if you are using an RSA key for signing, set this variable to
##  ``pgp-md5'', if you use a PGP 5 DSS key for signing, say ``pgp-sha1''
##  here. The value of this variable will show up in the micalg parameter
##  of MIME headers when creating RFC 2015 signatures.
##
#set pgp_sign_micalg = pgp-md5

## pgp_v2
##  Type: string
##  Default: system dependent
##  This variable allows you to override the compile time definition of
##  where the PGP 2.* binary resides on your system.
##
#set pgp_v2 = system dependent

## pgp_v2_language
##  Type: string
##  Default: en
##  Sets the language, which PGP 2.* should use. If you use language.txt
##  from the mutt doc directory, you can try the languages "mutt"
##  (English) or "muttde" (German) to reduce the noise produced by pgp.
##
#set pgp_v2_language = en

## pgp_v2_pubring
##  Type: string
##  Default: $PGPPATH/pubring.pgp or ~/.pgp/pubring.pgp if $PGPPATH isn't
##  set.
##
##  Points to the PGP 2.* public keyring.
##
#set pgp_v2_pubring = $PGPPATH/pubring.pgp or ~/.pgp/pubring.pgp if $PGPPATH isn't

## pgp_v2_secring
##  Type: string
##  Default: $PGPPATH/secring.pgp or ~/.pgp/secring.pgp if $PGPPATH isn't
##  set.
##
##  Points to the PGP 2.* secret keyring.
##
#set pgp_v2_secring = $PGPPATH/secring.pgp or ~/.pgp/secring.pgp if $PGPPATH isn't

## pgp_v5
##  Type: string
##  Default: system dependent
##  This variable allows you to override the compile time definition of
##  where the PGP 5.* binary resides on your system.
##
#set pgp_v5 = system dependent

## pgp_v5_language
##  Type: string
##  Default: en
##  Sets the language, which PGP 5.* should use. If you use language50.txt
##  from the mutt doc directory, you can try the languages "mutt"
##  (English) to reduce the noise produced by pgp.
##
#set pgp_v5_language = en

## pgp_v5_pubring
##  Type: string
##  Default: $PGPPATH/pubring.pkr or ~/.pgp/pubring.pkr if $PGPPATH isn't
##  set.
##
##  Points to the PGP 5.* public keyring.
##
#set pgp_v5_pubring = $PGPPATH/pubring.pkr or ~/.pgp/pubring.pkr if $PGPPATH isn't

## pgp_v5_secring
##  Type: string
##  Default: $PGPPATH/secring.skr or ~/.pgp/secring.skr if $PGPPATH isn't
##  set.
##
##  Points to the PGP 5.* secret keyring.
##
#set pgp_v5_secring = $PGPPATH/secring.skr or ~/.pgp/secring.skr if $PGPPATH isn't

##########################################################################
## Pipe options

## pipe_decode
##  Type: boolean
##  Default: unset
##  Used in connection with the pipe-message command.  When unset, Mutt
##  will pipe the messages without any preprocessing. When set, Mutt will
##  weed headers and will attempt to PGP/MIME decode the messages first.
##
#unset pipe_decode

## pipe_split
##  Type: boolean
##  Default: unset
##  Used in connection with the pipe-message command and the ``tag-
##  prefix'' operator.  If this variable is unset, when piping a list of
##  tagged messages Mutt will concatenate the messages and will pipe them
##  as a single folder.  When set, Mutt will pipe the messages one by one.
##  In both cases the the messages are piped in the current sorted order,
##  and the ``$pipe_sep'' separator is added after each message.
##
unset pipe_split

## pipe_sep
##  Type: string
##  Default: newline
##  The separator to add between messages when piping a list of tagged
##  messages to an external Unix command.
##
set pipe_sep = newline

##########################################################################
## Printing options

## print_command
##  Type: string
##  Default: lpr
##  This specifies the command pipe that should be used to print messages.
##
set print_command = lpr

## print
##  Type: quadoption
##  Default: ask-no
##  Controls whether or not Mutt asks for confirmation before printing.
##  This is useful for people (like me) who accidentally hit ``p'' often.
##
set print = ask-no

##########################################################################
## General Sendmail options

## use_8bitmime
##  Type: boolean
##  Default: unset
##  Warning: do not set this variable unless you are using a version of
##  sendmail which supports the -B8BITMIME flag (such as sendmail 8.8.x)
##  or you may not be able to send mail.
##
##  When set, Mutt will invoke ``$sendmail'' with the -B8BITMIME flag when
##  sending 8-bit messages to enable ESMTP negotiation.
##
unset use_8bitmime

## sendmail_wait
##  Type: number
##  Default: 0
##  Specifies the number of seconds to wait for the ``sendmail'' process
##  to finish before giving up and putting delivery in the background.
##
##  Mutt interprets the value of this variable as follows:
##
##  >0
set sendmail_wait = 0

## dsn_notify
##  Type: string
##  Default: none
##  Note: you should not enable this unless you are using Sendmail 8.8.x
##  or greater.
##
##  This variable sets the request for when notification is returned.  The
##  string consists of a comma separated list (no spaces!) of one or more
##  of the following: never, to never request notification, failure, to
##  request notification on transmission failure, delay, to be notified of
##  message delays, success, to be notified of successful transmission.
##
##  Example: set dsn_notify="failure,delay"
##
#set dsn_notify = none

## dsn_return
##  Type: string
##  Default: none
##  Note: you should not enable this unless you are using Sendmail 8.8.x
##  or greater.
##
##  This variable controls how much of your message is returned in DSN
##  messages.  It may be set to either hdrs to return just the message
##  header, or full to return the full message.
##
##  Example: set dsn_return=hdrs
##
#set dsn_return = none

## sendmail
##  Type: string
##  Default: /usr/lib/sendmail -oi -oem
##  Specifies the program and arguments used to deliver mail sent by Mutt.
##  Mutt expects that the specified program interprets additional
##  arguments as recipient addresses.
##
#set sendmail = /usr/lib/sendmail -oi -oem


################# Couleurs S-Lang  ###################################


color attachment	brightred	black
color error     	yellow		black
color indicator 	brightyellow	black
color markers   	red		black
color message  		cyan		black
color normal    	white		black
color quoted    	green		black
color signature 	cyan		black
color status    	black		white
color tilde     	yellow     	black
color tree   		red  		black

color hdrdefault red black
color header    yellow  black   ^from:
color header    cyan    black   ^subject:
color header    magenta black   ^(to|cc|delivered-to):
color header    magenta black   ^(x-mailer|user-agent):
color header    magenta black   ^organization:

color body  yellow   black   (ht|f)tp://[-0-9A-Za-z_/.~:\#%@,+?&=]*[0-9A-Za-z_/\#%]
color body  yellow   black   [-0-9A-Za-z_%.+]+@[-0-9A-Za-z_.]*[A-Za-z]

#######################
# Ignoring commands

ignore *
unignore from date subject to cc
unignore organization organisation x-mailer: x-newsreader: x-mailing-list:
unignore posted-to: